Product Classification
Stay informed about the latest industry trends, technological innovations, company milestones, and upcoming events from Magpow.
SK-2517 STONE SURFACEADH ESIVE 25KG
DESCRIPTION
SK-2517 Stone Surface Epoxy
Eco-friendly Strong Penetration Good Yellowing Resistance Strong Repair Capability
Model & Specification
| Model & Specification | 1250KG | 250KG |
|---|---|---|
| SK-2517 Stone Surface Epoxy | A:1000KG/drum | A:200KG/drum |
| B:250KG/drum | B:25KG×2/drum |
Appearance
Colorless transparent liquid
Mixing Ratio
A:B = 4:1
Technical Data
| No. | Item | SK-2517 Stone Surface Epoxy |
|---|---|---|
| 1 | Appearance | Part A: Colorless and transparent liquid |
| Part B: Colorless and transparent liquid | ||
| 2 | Viscosity (mPa·s) | Part A: 400-600 |
| Part B: 20-60 | ||
| 3 | Mix ratio (A:B) | 4:1 |
| 4 | Pot life (25℃, min) | 25-35 |
| 5 | Initial curing time (25℃, h) | 3-5 |
| 6 | Shear Strength (RT48h, MPa) | ≥10.0 |
Scope of Application
Mainly used for repairing micro-cracks, pinholes, chicken toe-shaped cracks, ant-shaped cracks, and uneven patches on the surface of various stones (marble, limestone, granite, sandstone). Not suitable for light-colored stones such as Yas White, Jazz White, and acidic stones. This product is particularly suitable for drying line processes.
Product Advantages
- Low viscosity, strong penetration, moderate curing speed, can penetrate extremely small micro-cracks, strong repair capability;
- Almost non-volatile, low odor, low irritation, long pot life, convenient for construction operation;
- High bonding strength, good permeability, strong adhesion, excellent aging resistance, good yellowing resistance of the glue layer;
- Complies with GB18583, GB30982 standards, EU ROHS directive standards, and is an eco-friendly product.
Precautions
Part 1: To achieve the best results, the following precautions should be observed during use:
- 1 Insufficient drying of the slab or excessive air humidity causes the slab to absorb moisture, resulting in high moisture content;
- 2 The A/B components of the adhesive are not mixed according to the specified ratio, or the mixed adhesive is not used within the pot life;
- 3 Dead corners during stirring or insufficient stirring time lead to uneven mixing of the adhesive;
- 4 Mixing tools for components A and B are used interchangeably, causing premature curing reaction;
- 5 In winter when temperatures are low, the product may crystallize or cake. The adhesive can be heated to dissolve before use without affecting performance.
Part 2: If safety issues occur during product use, the following measures should be taken immediately:
- 6 For uncured adhesive on skin or clothing, wipe clean with a cloth dipped in alcohol before curing, then wash with soapy water. If adhesive gets into eyes, rinse immediately with plenty of water or seek medical attention. If swallowed, do not induce vomiting; drink plenty of egg whites or milk.