Water Based PVA Craft Glue Feature

• Optimal Solid Content
• High Bonding Strength
• Fast setting and curing
• Safe and eco-friendly

Main Component

Polyvinyl acetate emulsion unit, water, filler

Specification

MPF101: 500g/pc, 24pcs/ctn

Scope of Application( Typical Solid Content: 20% - 35%)

1. Paper and Packaging Industry: Mainly used in pasting, carton forming, low-grade paper tube winding, book binding , and craft making where high water resistance and strength are not critical.
2. Primary Processing and Temporary Fixing: Suitable for initial positioning or temporary bonding in furniture production.
3. Porous Material Bonding: Due to its good penetration, it can be used for bonding porous materials with low surface requirements.

Using Method

1. The joint surface must be clean and dry.
2. Apply adhesive, press parts together until set, and allow 24 hours at room temperature to achieve full strength.

Warning

• 1 Do not use iron drum packaging.
• 2 Application Temperature: Must be 10°C or above. The assembled product must also be maintained at 10°C or above until fully cured. Lower temperatures will prevent proper film formation, resulting in poor adhesion.
• 3 Clean after using: Wipe the bottle mouth clean immediately after use and seal the cap tightly for future use.
• 4 If partially coagulated: If the adhesive shows signs of partial coagulation, mix it thoroughly until uniform. This will not affect its performance.
• 5 Wood Moisture Content: The moisture content of wood must be controlled between 8% and 15%. Content outside this range will adversely affect the bonding quality.
• 6 DANGER: Do not ingest. Keep out of reach of children.

Storage And Packing

1. Storage: Store in a sealed non-metal container at a temperature between 5°C and 37°C (41°F and 99°F). Protect from freezing and excessive heat. The product has a shelf life of 12 months from the production date. If the product exceeds this shelf life, it may still be used only if it passes quality testing.

2. Freezing & Thawing:

• Slight Freezing: If the product freezes slightly, thaw it fully in a warm environment at 30-40°C (86-104°F) and then stir evenly. It can be used if a smooth, consistent consistency is restored.
• Severe Freezing: If the product is severely frozen for an extended period and cannot be restored-evidenced by clumping, stratification, or broken emulsion-it must be discarded and should not be used.

3. Transportation: Handle, preserve, and transport as a non-flammable material.

Hot Tags

water based pva craft glue, China water based pva craft glue manufacturers, suppliers, Polyvinyl Wood Glue, PVA Bond for Wood, PVA Glue for Furniture, Water Based PVA Craft Glue, wood glue